acemd.2865P.exe has encountered a problem and must close

Message boards : Number crunching : acemd.2865P.exe has encountered a problem and must close

Author	Message
[AF>Belgique] bill1170 Send message Joined: 4 Jan 09 Posts: 13 Credit: 1,330,654,222 RAC: 651,651 Level Scientific publications	Message 28924 - Posted: 2 Mar 2013 \| 22:58:20 UTC
	Windows error message "acemd.2865P.exe a rencontré un problème et doit fermer. Nous vous prions de nous excuser pour le désagrément encouru." with this wu :37x2-NOELIA_TRYP_0-1-3-RND1081 I had also a few errors during the lasts days with short wus that I never got before. I cannot say if it's due to the new application or to the upgrade to the last driver (GTX660Ti).
	ID: 28924 \| Rating: 0 \| rate: / Reply Quote

flashawk Send message Joined: 18 Jun 12 Posts: 297 Credit: 3,572,627,986 RAC: 0 Level Scientific publications	Message 28926 - Posted: 3 Mar 2013 \| 0:20:38 UTC
	Look here http://www.gpugrid.net/forum_thread.php?id=3311 I've had the same issues, I noticed that if you stop or suspend one of the new Noelia's for whatever reason, that error will pop up and I have to restart the computer to get the GPU working right again. At that point the work unit has to be aborted because I couldn't get it to run on either card. If I hadn't stopped it (suspended), I'm sure it would have finished no problem.
	ID: 28926 \| Rating: 0 \| rate: / Reply Quote

[AF>Belgique] bill1170 Send message Joined: 4 Jan 09 Posts: 13 Credit: 1,330,654,222 RAC: 651,651 Level Scientific publications	Message 28931 - Posted: 3 Mar 2013 \| 11:23:47 UTC - in response to Message 28926.
	Thank you flashawk ! I hadn't see that thread. yes the tasks are suspended regularly. I had another case, same issue. I just try to revert to driver 310.90 to be sure it's not on my side.
	ID: 28931 \| Rating: 0 \| rate: / Reply Quote

John C MacAlister Send message Joined: 17 Feb 13 Posts: 181 Credit: 144,871,276 RAC: 0 Level Scientific publications	Message 28932 - Posted: 3 Mar 2013 \| 11:58:59 UTC Last modified: 3 Mar 2013 \| 12:15:29 UTC
	I observed the same problem with one of my GTX 650 Ti GPUs when I awoke today. I did not suspend the tasks as I was asleep, two floors up. I will have look for the cause...... Just after I posted this note, a message flashed up that a display driver had stopped and had recovered. My system builder will need to help me. :(
	ID: 28932 \| Rating: 0 \| rate: / Reply Quote

flashawk Send message Joined: 18 Jun 12 Posts: 297 Credit: 3,572,627,986 RAC: 0 Level Scientific publications	Message 28939 - Posted: 3 Mar 2013 \| 17:57:50 UTC Last modified: 3 Mar 2013 \| 17:58:30 UTC
	It's the NOELIA work units that are causing all the problems with all the computers, it's a new program somehow doing it (6.18). Don't pull you're hair out trying to "fix" them, we'll just wait and see what the scientists do.
	ID: 28939 \| Rating: 0 \| rate: / Reply Quote

[AF>Belgique] bill1170 Send message Joined: 4 Jan 09 Posts: 13 Credit: 1,330,654,222 RAC: 651,651 Level Scientific publications	Message 29254 - Posted: 26 Mar 2013 \| 13:17:14 UTC Last modified: 26 Mar 2013 \| 13:17:32 UTC
	A huge number of "nathan" later. What I notice is : - all nathan tasks are succefull on my 660Ti XP32 driver 310.90 - no fatal error nor error message. But each time a task is launched or relaunched for any reason the bios is beeping. It probably shows an error but which one ? Memory use ? Hope this can help the bug seekers.
	ID: 29254 \| Rating: 0 \| rate: / Reply Quote

Bedrich Hajek Send message Joined: 28 Mar 09 Posts: 486 Credit: 11,595,735,228 RAC: 4,513,283 Level Scientific publications	Message 29258 - Posted: 26 Mar 2013 \| 23:44:35 UTC - in response to Message 29254.
	A huge number of "nathan" later. What I notice is : - all nathan tasks are succefull on my 660Ti XP32 driver 310.90 - no fatal error nor error message. But each time a task is launched or relaunched for any reason the bios is beeping. It probably shows an error but which one ? Memory use ? Hope this can help the bug seekers. Funny, you should mention beeping, my XP computer does the same thing, and up until now, I ignored it. This same machine also occasionally errors out on these nathans. Though I managed to reduce the errors by reducing the graphic card speed by about 2%, but I haven't been able to eliminated them completely. I think the new application might be a little bit less stable. My windows 7 machine, so far (knock on wood) has been perfect with these nathans.
	ID: 29258 \| Rating: 0 \| rate: / Reply Quote

skgiven Volunteer moderator Volunteer tester Send message Joined: 23 Apr 09 Posts: 3968 Credit: 1,995,359,260 RAC: 0 Level Scientific publications	Message 29541 - Posted: 23 Apr 2013 \| 14:04:31 UTC - in response to Message 29258.
	Problem Event Name: APPCRASH Application Name: acemd.2865P.exe cysx29-NOELIA_PEPTGPRC-1-2-RND6827_1 4376361 23 Apr 2013 \| 8:33:15 UTC 23 Apr 2013 \| 13:09:11 UTC Error while computing 8,879.41 8,720.78 --- Long runs (8-12 hours on fastest card) v6.18 (cuda42) Blue screen crash, and on reboot APPCRASH Error Messages. The task kept running but the percentage was not making any progress, so I closed the app. Stderr output <core_client_version>7.0.60</core_client_version> <![CDATA[ <message> The system cannot find the path specified. (0x3) - exit code 3 (0x3) </message> <stderr_txt> MDIO: warning: redefined atom parameters for oc MDIO: warning: redefined atom parameters for h MDIO: cannot open file "restart.coor" MDIO: warning: redefined atom parameters for oc MDIO: warning: redefined atom parameters for h Kernel not foundAssertion failed: a, file swanlibnv2.cpp, line 59 This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. </stderr_txt> ]]> ____________ FAQ's HOW TO: - Opt out of Beta Tests - Ask for Help
	ID: 29541 \| Rating: 0 \| rate: / Reply Quote

chuckbens Send message Joined: 15 Oct 12 Posts: 18 Credit: 27,916,718 RAC: 0 Level Scientific publications	Message 30668 - Posted: 5 Jun 2013 \| 15:30:02 UTC - in response to Message 29541.
	I think AVG Identity Protection is causing the problem for me. I turned it off and I'll see what happens... Stderr output <core_client_version>7.0.64</core_client_version> <![CDATA[ <message> The system cannot find the path specified. (0x3) - exit code 3 (0x3) </message> <stderr_txt> MDIO: cannot open file "output.restart.coor" SWAN : FATAL : Cuda driver error 700 in file 'swanlibnv2.cpp' in line 1574. Assertion failed: a, file swanlibnv2.cpp, line 59 This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. </stderr_txt> ]]>
	ID: 30668 \| Rating: 0 \| rate: / Reply Quote

Post to thread

Message boards : Number crunching : acemd.2865P.exe has encountered a problem and must close

	About	Science	Volunteers	Performance	Forum	Join us	Donate